No, but I’m in the UK, so the lowest temp this doorbell has ever experienced here is around -8°C. Depending on where in the world you are, that might not even register as “cold”. Also, I’ve wired it with the official 16V power supply included in the box and the “chime adapter” dongle thingy, which turned out to be really important for it to function properly.
No idea how it compares to Ring, but my wife is a severe technophobe and she had no issues or complaints with Protect. We only have one doorbell + one camera connected to a CloudKey+ though, so your mileage may vary.
Motion detection works reasonably well as far as I can tell, with person, vehicle and animal detection too.
Regarding the doorbell, one option you have is to try finding a second-hand Unifi G4 Doorbell (non-pro). It can be wired with only the two wires you already have. Just make sure you have relatively good 5GHz WiFi reception near your front door, because the 2.4GHz antennas on this model are notably bad.
I had the same problem: Debian host + official Jellyfin Docker image, all set up according to the official guide, but it would fail to transcode anything.
There was no relevant information about what was wrong in the logs so what I did was:
docker exec -itinto the Jellyfin container.Long story short, because the Nvidia toolkit uses the driver/libraries from the host, the error was that I was missing the library
libnvidia-encode1on the host. After installing that, everything works as it should.